AnthraciteBeforePreviewAnthracite fascia, soffit and square gutters on a chalet bungalow
Example preview made with our tool
uPVC boards
uPVC fascia comes as full replacement boards, about 18 mm thick and fixed straight to the rafters, or thin capping boards, about 9 mm, over existing timber. In Cork the boards cost €45 to €70 a metre fitted and commonly last 20 to 30 years.
Free, no obligation. One local company prices it, not five.
Before and after
Real houses with tired boards, and the same photo with new fascia and soffit drawn by our tool. Try it on your own house in two minutes.
AnthraciteBeforePreviewAnthracite fascia, soffit and square gutters on a chalet bungalow
Example preview made with our tool
AnthraciteBeforePreviewWhite boards to anthracite grey, ogee gutters, on a bungalow
Example preview made with our tool
AnthraciteBeforePreviewAnthracite boards and square gutters on a row of dormers
Example preview made with our tool
Two kinds of board
Replacement fascia is load bearing on its own, typically 18 mm, fixed straight to the rafter ends once the old timber is off. Capping boards are thin, typically 9 mm, and fixed over the old timber, which still carries the gutter, so it has to be free of rot. Ask which one is quoted: capping over tired timber isn't the same job as new boards.
Soffits and vents
Where the attic is insulated at ceiling level, SEAI's standard asks for a continuous gap of at least 10 mm at the eaves, or the same in vents; at rafter level, 25 mm. A vented soffit does nothing if the timber behind it is solid, so ask the fitter to show you the vents are open through to the roof space.
Colours
White is the base price; another colour adds €100 to €300 on a full job. Anthracite grey is the one most people ask for now. Pick it at the start: uPVC isn't meant to be painted.
Three steps
See it on your home
Take a photo of the front of your house, pick a colour, a gutter shape and the boards, and see the same house with the work done. Then ask for any change. Free, in about two minutes.
Loading the Studio…
Free quote
Tap what you need and leave your number. It goes to one fascia and soffit company that covers your part of Cork, and they ring you to arrange a look and a written price.
FAQ
For a board fixed to the rafters, load bearing, typically 18 mm. 9 mm boards are capping and need sound timber behind.
If the roof is ventilated at the eaves, yes: a continuous 10 mm gap or equivalent where the attic is insulated at ceiling level.
Commonly 20 to 30 years with a wash once a year. Salt air is harder on fixings than on the boards: ask for stainless screws.
Guides
Every Cork town
One company covers each request. Pick your town for its homes, its rain and the local detail.
One company that covers your part of Cork rings you. Nothing is agreed until you accept a written price.